Installation Mistakes of the Rotary Kiln’s Base Wheels

The rotary kiln plays an irreplaceable role in the cement industry and how to apply it reasonably and maintain it correctly has become the key factor that determines a company’s operation and development condition. The base wheels are core components for the rotary kiln. Today our experts will talk about the details of the base wheels’ installation and adjustment.

In the real installation process of the rotary kiln’s base wheels, we often ignore the following errors: 1. the unqualified feeding and discharging scraping of the oil wedge; 2. the wheel’s shaft size and precision haven’t been checked; 3. the tile-purpose follower bolt, the oil dipper set bolt and the pouring lacquer tray fixed bolt are not all fastened according to the standard; 4. Inside the bottom of the base wheel, the lacquer tray and the bottom size are not checked so that damage will probably happen to the operating wheel; 5. there is serious abrasion happening to the lacquer tray and the inner components of the base wheel, so it’s common to see the tiles broken because of the stuck problem; 6. There may be impurity entering the distance between the lacquer tray, tile surface and the wheel shaft.

Having seen so many mistakes we may make in the practical operation of the rotary kiln, we should reconsider the correct operation steps for us during the installation and adjustment of the rotary kiln’s base wheels and other tiny but important components. When installing the base wheels, we should be more careful to avoid the above mentioned mistakes.